Kitchen Cabinet Cost in Kenya
🍳 Kitchen Cabinet Cost in Kenya — The Complete Guide
Kitchen cabinet cost in Kenya is one of the most searched and most confusing pricing topics in the Kenyan home improvement market — with quotes ranging from KES 15,000 for a single ready-made unit on Jiji to KES 800,000+ for a full custom fitted kitchen in a Karen bungalow.
Moreover, Hauzisha Interiors quotes KES 12,000–28,000 per running foot for fitted kitchen cabinets, while Ebuild Kenya sells cabinet board materials (Blockboard 18mm) from KSh 3,500 per 4ft×8ft sheet — and neither of these figures gives you a clear, actionable answer to the single most important question: what will your specific kitchen cabinet project actually cost?#
Furthermore, the gap between those numbers is not deception — it is the difference between raw material cost, supply-only pricing, and professional fitted installation including design, fabrication, hardware, and a 1-year warranty. As a result, this Suimas guide is Kenya’s most complete, most specific, and most transparently sourced kitchen cabinet cost guide — combining verified 2026 per-running-foot pricing from Hauzisha, verified board material prices from Ebuild Kenya and Gypsum Ceiling Supplies, ready-made unit prices from Jiji, and Suimas’s own installed pricing with real project examples and measurable outcomes. Consequently, by the time you finish this guide, you will know exactly what kitchen cabinet specification is right for your project — and exactly what it should cost.
The Critical Measurement — Running Feet vs Linear Metres
Before any kitchen cabinet price makes sense, you need to understand how Kenyan contractors measure and quote kitchen cabinetry. Most Kenyan kitchen contractors quote per running foot (rf) — not per linear metre. Moreover, running foot is the unit Hauzisha Interiors, most Nairobi cabinet makers, and hardware suppliers use consistently. Furthermore, 1 running foot = 0.3048 metres. As a result, here is the quick conversion you need:
| Running feet | Linear metres | Typical application |
|---|---|---|
| 8 rf | 2.4 m | Very small apartment kitchen |
| 10 rf | 3.0 m | Small apartment one-wall kitchen |
| 14 rf | 4.3 m | Standard apartment L-shaped kitchen |
| 20 rf | 6.1 m | Standard L-shaped family kitchen (10×10) |
| 24 rf | 7.3 m | Family kitchen (12×12) |
| 30 rf | 9.1 m | Large U-shaped kitchen |
| 35–45 rf | 10.7–13.7 m | Open-plan island kitchen |
How to measure your kitchen running feet: Walk along the walls where your lower cabinets sit. Measure each wall run in feet. Add them all up — that is your running footage. Upper cabinets are priced as a separate line item — not as a doubling of the running footage.
Kitchen Cabinet Cost per Running Foot in Kenya — 2026
The most reliable and most comparable way to price kitchen cabinets in Kenya is per running foot of lower cabinetry inclusive of worktop. Moreover, Hauzisha Interiors provides the most credible per-running-foot benchmark in the Nairobi market in 2026. Furthermore, Suimas’s installed prices align with Hauzisha’s ranges while adding the complete Suimas value stack — 3D visualization, BOQ pricing, in-house fabrication, and 1-year warranty.
Kitchen Cabinet Cost per Running Foot — Kenya 2026:
| Build Level | Material | Cost per running foot (KES) | What’s Included |
|---|---|---|---|
| Budget | Blockboard/particle board, laminate doors, laminate worktop | 12,000 – 16,000 | Carcass, laminate doors, basic hinges, laminate countertop |
| Mid-range | Marine ply carcass, MDF fronts, granite worktop | 16,000 – 22,000 | Cabinet, granite top, soft-close hinges |
| Mid-premium | Marine ply, acrylic/handle-less door, quartz worktop | 20,000 – 28,000 | Cabinet, quartz top, BLUM hardware |
| Premium | PG Bison/premium board, custom doors, sintered stone | 28,000 – 40,000+ | Full custom, premium finishes, all hardware |
Upper wall cabinet cost per running foot:
| Build Level | Cost per running foot (KES) |
|---|---|
| Budget laminate | 4,500 – 7,000 |
| Mid-range MDF fronts | 7,000 – 10,000 |
| Premium custom | 10,000 – 15,000+ |
Important: The per-running-foot rates above are for fitted, installed cabinetry including the worktop above lower units. Upper cabinets are priced separately per running foot and do not include a worktop.
👉 View Kitchen Interior Design Services →
📞 Call 0717 044 443 for a Free Kitchen Cabinet Quote →
Kitchen Cabinet Cost per Linear Metre — Kenya 2026
For clients who prefer linear metre pricing — as used by European suppliers and some Kenyan designers — here is the direct conversion from running foot rates:
| Build Level | Cost per linear metre (KES) |
|---|---|
| Budget (blockboard + laminate) | 39,000 – 52,000 per lm |
| Mid-range (marine ply + granite) | 52,000 – 72,000 per lm |
| Mid-premium (marine ply + quartz) | 65,000 – 92,000 per lm |
| Premium (PG Bison + sintered stone) | 92,000 – 131,000+ per lm |
Note: Per linear metre = per running foot × 3.28
What Does a Single Kitchen Cabinet Cost in Kenya?
This is Kenya’s most frequently asked kitchen cabinet micro-question — and the one no competitor answers clearly. Moreover, individual cabinet prices vary significantly by type, size, and material specification.
Ready-Made / Stock Kitchen Cabinet Prices — Kenya 2026 (Jiji Market Rates)
From Jiji.co.ke marketplace listings, single ready-made kitchen cabinets are available in Kenya from:
| Cabinet Type | Price Range (KES) | Notes |
|---|---|---|
| Single base cabinet (ready-made) | 15,000 – 30,000 | Fixed widths — may not fit your wall exactly |
| Wall/upper cabinet (ready-made) | 8,000 – 18,000 | Basic laminate doors |
| Kitchen cabinet set (free-standing) | 45,000 – 120,000 | Multiple units, no custom fit |
The critical limitation of ready-made cabinets: Ready-made units come in fixed widths — typically 300mm, 400mm, 500mm, and 600mm. Moreover, against a real kitchen wall, fixed-width units leave gaps and dead corners that waste expensive kitchen storage space. Furthermore, on a 3.2m kitchen wall, ready-made cabinets will leave 200mm–400mm of wasted space in gap fills. As a result, custom-fitted cabinets cost 10–20% more per unit but deliver 100% of the available wall space as productive storage — making them better value in almost every Kenyan kitchen.
Custom-Fitted Kitchen Cabinet Prices — Kenya 2026 (Suimas)
| Cabinet Type | Cost per unit (KES) | Notes |
|---|---|---|
| Base/floor unit (600mm standard) | 18,000 – 35,000 | Includes countertop share, hinges, soft-close |
| Upper/wall unit (600mm standard) | 6,000 – 14,000 | Includes doors and adjustable shelves |
| Corner base unit (L-shape junction) | 25,000 – 55,000 | Pull-out carousel or Le Mans fitting |
| Drawer unit (3-drawer stack) | 22,000 – 45,000 | Full-extension drawers, soft-close |
| Tall pantry/larder unit (2100mm) | 35,000 – 75,000 | Floor-to-ceiling storage with pull-out fittings |
| Kitchen island (custom) | 60,000 – 200,000+ | Depends on size, material, and features |
| Pull-out bin cabinet | 18,000 – 35,000 | Integrated waste management |
| Sink base unit | 18,000 – 30,000 | Marine board mandatory — no MDF |
Cabinet Board Material Prices in Kenya 2026 — Verified Supplier Data
Understanding what boards cost at supply level gives you the foundation for assessing any kitchen cabinet quotation. The following prices are verified from Ebuild Kenya (Ring Road Parklands, Westlands) and Gypsum Ceiling Supplies Kenya — two of Nairobi’s most credible building materials suppliers.
Cabinet Board Supply Prices — Kenya 2026:
| Board Type | Size | Price per sheet (KES) | Kitchen Use |
|---|---|---|---|
| Comply Particle Board (White) | 18mm × 4ft × 8ft | 3,000 | Budget cabinets — dry zones only |
| Comply Particle Board (Black Cherry) | 18mm × 4ft × 8ft | 3,000 | Budget cabinets — avoid wet zones |
| Coimbra Particle Board | 18mm × 4ft × 8ft | 3,600 | Budget cabinets |
| Blockboard 18mm (Comply) | 18mm × 4ft × 8ft | 3,500 | Mid-range — better than particle board |
| White MDF Board (Comply) | 18mm × 4ft × 8ft | 3,850 | Mid-range — good painted surface |
| Sapele MDF Board | 18mm × 4ft × 8ft | 3,850 | Mid-range — wood-grain finish |
| MDF Brown Beech (Comply) | 18mm × 4ft × 8ft | 3,850 | Mid-range |
| MDF Shale Oak (Comply) | 18mm × 4ft × 8ft | 3,900 | Mid-range |
| MDF American Walnut (Comply) | 18mm × 4ft × 8ft | 3,850 | Premium-look mid-range |
| MDF Black Cherry (Comply) | 18mm × 4ft × 8ft | 3,850 | Premium-look mid-range |
| MDF Coimbra (Comply) | 18mm × 4ft × 8ft | 3,850 | Mid-range |
| Plywood Boards (Comply) | 4ft × 8ft | 450 – 3,600 | Mid-range — varies by thickness |
Sources: Ebuild Kenya (ebuild.ke) and Gypsum Ceiling Supplies Kenya ()
What these supply prices mean for your cabinet quotation: A 4ft×8ft board sheet covers approximately 0.37 m² of finished cabinet face area (accounting for waste and joints). Moreover, a typical 6-foot base cabinet requires approximately 2.5–3 sheets of board. Furthermore, at KSh 3,500–3,900 per sheet, the raw board cost for one base cabinet is KES 8,750–11,700 — before labour, hardware, doors, countertop, and profit margin. As a result, a custom base cabinet that is correctly priced at KES 18,000–35,000 installed is not overpriced — it reflects the full material, fabrication, and installation cost stack.
Cabinet Board Selection Guide — The Most Important Decision in Your Kitchen
The board material your kitchen cabinets are built from is the single most important specification decision in any Kenyan kitchen project. Moreover, the wrong board choice — particularly in wet zones like under the sink, adjacent to the hob, or in a coastal home — can mean kitchen cabinet failure within 3–5 years. Furthermore, many Kenyan clients are sold expensive door finishes (high-gloss acrylic, PU painted doors) on low-quality particle board carcasses — a combination that looks beautiful on day one and fails within 5 years.
The Suimas Board Selection Rule — Invest in Structure Before Surface
| Zone | Minimum Board | Recommended | Why |
|---|---|---|---|
| Under sink | Marine plywood | Marine plywood | Constant moisture exposure — MDF and particle board will swell and fail |
| Dish rack area | Marine plywood | Marine plywood | Drip water from dishes — particle board delaminate |
| Hob area | MDF or marine ply | Marine plywood | Heat, steam, and cooking oil exposure |
| Dry storage zones | Blockboard | Marine plywood or MDF | Lower risk — blockboard adequate for dry use |
| Upper wall units | MDF | MDF or marine plywood | Lower moisture exposure — MDF adequate if joints well sealed |
| Coastal Kenya (Mombasa, Diani, Kilifi) | Marine plywood ONLY | PG Bison or equivalent | Ambient humidity destroys MDF and particle board within 2–3 years at the coast |
The single most common Kenya kitchen cabinet failure: A particle board carcass under the sink. Moreover, in Kenya’s humid kitchen environment, water drips from pipes and sink base — and particle board swells, delaminates, and collapses within 2–5 years. Furthermore, a KES 500/sheet saving on particle board vs marine plywood costs KES 30,000–60,000 in cabinet replacement within 5 years. As a result, Suimas specifies marine plywood as the minimum board specification on all wet-zone kitchen cabinets — without exception.
Kitchen Worktop Cost per Running Foot — Kenya
The worktop is the most visible design decision in any kitchen — and worktop material selection has the largest impact on both aesthetics and the total kitchen cabinet quotation. Moreover, Hauzisha Interiors confirms that on a 14-running-foot kitchen, the difference between a laminate and quartz worktop alone is over KES 150,000. Furthermore, worktop is always quoted separately from cabinetry — the per-running-foot rates below are for the worktop only, not the cabinet underneath.
Kitchen Worktop Cost per Running Foot — Kenya :
| Worktop Material | Cost per running foot (KES) | Cost per linear metre (KES) | Verdict |
|---|---|---|---|
| Post-formed laminate | 2,500 – 5,000 | 8,200 – 16,400 | Budget only — chips and peels under heavy use |
| Ceramic or porcelain tile | 3,000 – 6,000 | 9,800 – 19,700 | Grout lines harbour bacteria — not ideal for food prep |
| Local Kenyan granite | 6,500 – 12,000 | 21,300 – 39,400 | Excellent value — durable, seal annually |
| Imported granite | 12,000 – 20,000 | 39,400 – 65,600 | Better colour range than local |
| Quartz (engineered stone) | 9,000 – 18,000 | 29,500 – 59,100 | Best mid-range choice — no sealing, stain resistant |
| Sintered stone (Dekton/Neolith) | 18,000 – 35,000+ | 59,100 – 114,800+ | Best luxury — heat, UV, and scratch resistant |
| Marble (local) | 14,000 – 28,000 | 45,900 – 91,900 | Beautiful but high maintenance |
| Marble (imported Carrara) | 28,000 – 60,000+ | 91,900 – 196,900+ | Ultra-luxury — feature surfaces only |
Door Finishes and Their Impact on Kitchen Cabinet Cost
Cabinet door finish is what clients see first — but it is the last decision that should drive budget allocation. Moreover, a premium acrylic door on a particle board carcass is like a luxury finish on a weak foundation. Furthermore, always confirm carcass board quality before discussing door finishes with any contractor.
Kitchen Cabinet Door Finish Cost Premium — Kenya 2026:
| Door Finish | Cost Premium over Baseline | Durability | Best for |
|---|---|---|---|
| Melamine/laminate (baseline) | 0% | Good — moderate wear resistance | Budget kitchens |
| Foil-wrapped MDF | +10–20% | Good — better moisture resistance than laminate | Budget-mid kitchens |
| Painted MDF (matt) | +15–25% | Good — can be touched up | Timeless look |
| Acrylic high-gloss | +30–50% | Excellent — scratch resistant | Modern kitchens |
| PU painted (spray) | +40–60% | Excellent — smooth, even finish | Premium modern |
| Handle-less (push-to-open) | +25–40% | Excellent — no hardware to replace | Contemporary minimal |
| Veneer (real wood face) | +50–80% | Excellent — natural warmth | Luxury traditional |
| Solid hardwood | +100–200% | Excellent — ages beautifully | Top-end luxury |
Hardware Costs — The Daily-Use Investment Every Budget Skips
Cabinet hardware — hinges, drawer runners, handles, and internal fittings — is the element clients interact with hundreds of times daily. Moreover, budget hinges fail within 3–5 years; BLUM soft-close systems last 15+ years under daily use. Furthermore, hardware specification is almost always excluded from per-running-foot cabinet quotes — and it represents a significant line item on any well-specified Kenyan kitchen.
Kitchen Cabinet Hardware Cost — Kenya :
| Hardware Item | Budget Option (KES) | BLUM/Premium (KES) |
|---|---|---|
| Hinges (per pair) | 150 – 350 | 600 – 1,200 |
| Full-extension drawer runner (per pair) | 300 – 600 | 1,200 – 2,500 |
| Pull handle (per piece) | 200 – 800 | 800 – 3,500 |
| Under-sink pull-out bin | 2,500 – 5,000 | 6,000 – 15,000 |
| Corner pull-out carousel (Le Mans) | 8,000 – 15,000 | 18,000 – 35,000 |
| Pantry pull-out system | 12,000 – 25,000 | 28,000 – 65,000 |
| Cutlery drawer insert | 1,500 – 3,500 | 4,000 – 12,000 |
| Total hardware — 10-unit kitchen | 15,000 – 35,000 | 55,000 – 150,000+ |
Suimas recommendation: Always specify BLUM or equivalent European brand soft-close hinges and full-extension drawer runners. Moreover, the premium over budget hardware on a full kitchen is KES 30,000–80,000. Furthermore, that premium buys 15+ years of daily-use quality — the single best value-per-shilling specification upgrade in any Kenyan kitchen.
Full Kitchen Cabinet Cost by Size — Kenya
10×10 Kitchen Cost in Kenya
A 10×10 kitchen is Kenya’s standard test size — an L or U layout on two walls of approximately 10 feet each, giving roughly 20 running feet of lower cabinetry. Moreover, Hauzisha Interiors confirms the 10×10 Kenya range as KES 240,000–560,000. Furthermore, here is how Suimas builds that cost:
| Component | Budget (KES) | Mid-Range (KES) | Premium (KES) |
|---|---|---|---|
| 20 rf lower cabinets + worktop | 240,000 – 320,000 | 320,000 – 440,000 | 440,000 – 600,000+ |
| 12 rf upper wall cabinets | 54,000 – 84,000 | 84,000 – 120,000 | 120,000 – 180,000 |
| Hardware (hinges, drawers, handles) | 15,000 – 30,000 | 35,000 – 70,000 | 70,000 – 150,000+ |
| 10×10 cabinet total | 309,000 – 434,000 | 439,000 – 630,000 | 630,000 – 930,000 |
12×12 Kitchen Cost in Kenya
A 12×12 layout gives approximately 24 running feet of lower cabinets. Moreover, Hauzisha Interiors quotes this at KES 380,000–680,000 for mid-to-premium specification. Furthermore, adding an island to a 12×12 kitchen adds KES 60,000–200,000+ depending on size and countertop material.
| Component | Budget (KES) | Mid-Range (KES) | Premium (KES) |
|---|---|---|---|
| 24 rf lower cabinets + worktop | 288,000 – 384,000 | 384,000 – 528,000 | 528,000 – 720,000+ |
| 14 rf upper wall cabinets | 63,000 – 98,000 | 98,000 – 140,000 | 140,000 – 210,000 |
| Hardware (hinges, drawers, handles) | 18,000 – 36,000 | 42,000 – 84,000 | 84,000 – 180,000+ |
| 12×12 cabinet total | 369,000 – 518,000 | 524,000 – 752,000 | 752,000 – 1,110,000 |
Full Kitchen Cabinet Cost by Kitchen Type — Kenya 2026
| Kitchen Type | Running Feet | Budget (KES) | Mid-Range (KES) | Premium (KES) |
|---|---|---|---|---|
| Small apartment kitchen (one-wall) | 8–12 rf | 96,000 – 192,000 | 128,000 – 264,000 | 264,000 – 480,000 |
| Standard apartment L-shape | 14–18 rf | 168,000 – 288,000 | 224,000 – 396,000 | 396,000 – 720,000 |
| 10×10 family kitchen | 20 rf | 309,000 – 434,000 | 439,000 – 630,000 | 630,000 – 930,000 |
| 12×12 family kitchen | 24 rf | 369,000 – 518,000 | 524,000 – 752,000 | 752,000 – 1,110,000 |
| Large U-shaped kitchen | 28–35 rf | 504,000 – 770,000 | 700,000 – 1,100,000 | 1,100,000 – 1,960,000 |
| Island kitchen (cabinets only) | 35–45 rf + island | 700,000 – 1,080,000 | 980,000 – 1,620,000 | 1,620,000 – 2,880,000+ |
All prices are for kitchen cabinets plus worktop only. Appliances, flooring, backsplash, lighting, plumbing, and electrical are additional.
Kitchen Island Cost in Kenya
The kitchen island is the most aspirational and most frequently requested kitchen element in Kenya’s upper-mid to luxury residential market. Moreover, an island adds both storage and preparation surface — and creates the social hub of any open-plan living space. Furthermore, island cost depends on four variables: length, width, board specification, worktop material, and whether a sink or hob is integrated.
Kitchen Island Cabinet Cost — Kenya :
| Island Specification | Cost (KES) |
|---|---|
| Small island (1.0m × 0.6m), laminate top | 60,000 – 90,000 |
| Standard island (1.2m × 0.8m), granite top | 90,000 – 150,000 |
| Standard island (1.2m × 0.8m), quartz top | 120,000 – 180,000 |
| Large island (1.5m × 0.9m), sintered stone top | 180,000 – 320,000 |
| Island with integrated hob | Add 30,000 – 80,000 |
| Island with undermount sink + plumbing | Add 35,000 – 80,000 |
| Waterfall edge countertop (both sides to floor) | Add 40,000 – 120,000 |
| Breakfast bar overhang (seating for 2–3) | Add 20,000 – 50,000 |
Custom vs Ready-Made Kitchen Cabinets in Kenya — The Real Cost Comparison
Many Kenyan homeowners consider ready-made cabinets to save money. This section gives the honest comparison.
Scenario: 12-running-foot one-wall apartment kitchen in Kilimani
| Approach | Cost | Outcome |
|---|---|---|
| Ready-made units (Jiji) — 4 base + 4 upper | KES 100,000 – 160,000 | Units are 600mm wide — leave 200mm gap at each end. Dead corners. No worktop included. Basic hinges fail within 2–3 years. |
| Custom-fitted Suimas (marine board, granite top) | KES 192,000 – 264,000 | Wall-to-wall fit. Every centimetre is productive storage. BLUM hardware lasts 15+ years. 1-year warranty. |
| Total 5-year cost (ready-made including replacements) | KES 150,000 – 220,000 | Re-purchase units, hire installer, replace swollen sink base |
| Total 5-year cost (Suimas custom) | KES 192,000 – 264,000 | Zero maintenance costs within warranty period |
The verdict: Ready-made cabinets appear cheaper upfront. Moreover, they almost always cost more over a 5-year period when gap fills, poor-fit adaptations, early hardware failure, and moisture damage are factored in. Furthermore, for a rental investment property where tenant satisfaction and ongoing maintenance cost directly affect yield, custom-fitted marine board cabinets consistently deliver better total returns.
✅ Verified Suimas Kitchen Cabinet Projects — Real Costs and Outcomes
Project 1 — Full Kitchen Cabinet Renovation | Karen, Nairobi
Specification: Custom PG Bison carcasses, handle-less flat-panel lacquered doors in matte white, Calacatta quartz island countertop with waterfall edge, integrated Bosch appliances, BLUM hardware throughout, LED under-cabinet lighting
Running footage: 22 rf lower + 12 rf upper + 1.4m island
Cabinet cost (excl. appliances): KES 590,000
“Our kitchen cabinets are the most commented-on element of our home. Suimas’s attention to detail was extraordinary — every drawer glides perfectly, every door sits level. The BOQ they provided was exactly what we paid.”
— M. Njoroge, Karen Nairobi
Result: Property value increased by KES 3.8 million. Kitchen specifically cited by the estate agent as the primary driver of the uplift.
Project 2 — Mid-Range Kitchen Cabinet Fit-Out | Kilimani Apartment
Specification: Marine board carcasses, handle-less laminate doors, local granite countertop, standard BLUM soft-close hinges, standard drawer runners
Running footage: 12 rf lower + 7 rf upper
Cabinet cost: KES 256,000
“The BOQ Suimas gave us itemized every board, every metre of countertop, every hinge. We knew exactly what we were paying for before a single board was cut.”
— James & Wanjiru M., Kilimani Nairobi
Result: Monthly rental value increased from KES 65,000 to KES 90,000. Cabinet renovation cost recovered within 13 months from increased rental income.
Why Suimas Kitchen Cabinets Cost What They Do — The Complete Cost Stack
Many Kenyan homeowners compare a Suimas kitchen cabinet quotation to a ready-made marketplace price and wonder why there is a 50–100% difference. Here is the complete honesty of what Suimas includes in every kitchen cabinet price:
| Cost Component | Ready-Made (Jiji) | Budget Contractor | Suimas |
|---|---|---|---|
| Board material | Particle board (basic) | MDF or blockboard | Marine ply minimum |
| Carcass quality | Fixed standard widths | Basic cuts | Precision-fitted to your wall |
| Door finish | Standard laminate | Standard laminate | Client-specified — full range |
| Hardware | Basic hinges | Basic hinges | BLUM soft-close standard |
| Worktop | Not included | Laminate or tile | Granite minimum — quartz standard |
| 3D visualization before fabrication | ❌ | ❌ | ✅ Free |
| Itemized BOQ before commitment | ❌ | ❌ | ✅ Free |
| 1-year workmanship warranty | ❌ | ❌ | ✅ Included |
| Factory-direct material pricing | ❌ | ❌ | ✅ Trade rates |
| Post-installation support | ❌ | ❌ | ✅ Included |
8 Tips to Reduce Kitchen Cabinet Cost in Kenya Without Compromising Quality
- Use marine plywood only in wet zones — specify marine board for the under-sink unit, dish rack area, and hob surround, and use blockboard or good MDF for all dry storage zones. Save KES 500–1,000 per sheet in dry zones.
- Keep your sink in its current location — moving the sink requires rerouting waste pipes and water supply. This adds KES 20,000–60,000 before a single cabinet is installed.
- Choose local granite over quartz for the main run — local Kenyan granite at KES 6,500–12,000/rf delivers excellent durability and good aesthetics. Save quartz specification for the island feature worktop if budget allows.
- Invest in BLUM hardware, simplify door finish — a flat-panel lacquered door on marine board with BLUM hardware consistently outperforms an ornate door on particle board with budget hinges over a 10-year period.
- Go handle-less or use simple rod handles — statement designer handles at KES 1,500–3,500 each add KES 30,000–70,000 on a 20-door kitchen. Handle-less push-to-open is premium-looking and eliminates the handle cost entirely.
- Avoid upgrading upper cabinet board spec — upper wall units have minimal moisture exposure. Standard quality MDF or blockboard with laminate or painted doors is adequate for upper cabinets — saving the marine board budget for the wet-zone lower units where it matters.
- Bundle cabinets with flooring and gypsum ceiling — Suimas’s combined kitchen fit-out packages covering cabinetry, gypsum ceiling, and floor tiling consistently deliver better total pricing than three separate contractors covering the same scope.
- Get a fully itemized BOQ — never accept a lump-sum kitchen cabinet quote. A lump-sum quotation gives any contractor freedom to reduce specification after signing. Moreover, Suimas provides a fully itemized BOQ — board type, running footage, door finish, hardware brand, worktop material, and installation cost — completely free before any commitment.
Kitchen Cabinet Cost FAQs — Kenya
How much do kitchen cabinets cost per running foot in Kenya?
As a 2026 guide, around KES 12,000–28,000 per running foot fitted for lower cabinets including the worktop. Moreover, blockboard + laminate sits at KES 12,000–16,000/rf, marine plywood + granite at KES 16,000–22,000/rf, and premium custom + quartz at KES 22,000–28,000+/rf. Upper wall cabinets are an additional KES 4,500–15,000/rf. Suimas always provides a free site visit and fully itemized BOQ before any commitment.
How much does a full fitted kitchen cost in Kenya?
Most fitted kitchens in Kenya cost between KES 250,000 and KES 1,100,000 for the cabinets and worktop. Moreover, a small apartment kitchen (8–12 rf) ranges from KES 96,000–480,000 and a standard family 10×10 kitchen runs KES 309,000–930,000+ depending on specification level. Furthermore, adding an island adds KES 60,000–320,000 depending on size and countertop.
What is the best board material for kitchen cabinets in Kenya?
Marine plywood is the best choice for all wet zones — under-sink, dish rack area, and hob surround — particularly in coastal Kenya. Moreover, MDF or blockboard is adequate for dry storage zones and upper cabinets. Furthermore, particle board and chipboard are not recommended for any Kenyan kitchen cabinet application due to poor moisture resistance and limited screw-hold strength.
Are ready-made kitchen cabinets from Jiji worth buying in Kenya?
Ready-made units at KES 15,000–30,000 per unit appear cheaper upfront — but they come in fixed widths, leave wasted space at wall ends, typically use particle board carcasses, and include budget hardware that fails within 2–3 years. Moreover, for most Nairobi kitchens, custom-fitted cabinets at 10–20% premium cost less over a 5-year period when wasted space, early hardware replacement, and moisture damage costs are included.
Why choose Suimas for kitchen cabinet installation in Kenya?
Suimas uses marine board as the minimum carcass specification, BLUM soft-close hardware as standard, factory-direct material pricing from verified suppliers, free 3D kitchen visualization before fabrication begins, a fully itemized BOQ covering every board, every metre of countertop, every hinge, and every fitting — plus a 1-year workmanship warranty and coverage across all 47 counties in Kenya.
Contact Our Kitchen Cabinet Team Today
Call us today at 0717 044 443 or 0739 255 050 or 0725 021 709.
Email: info@suimas.co.ke / info@interiordesigners.co.ke
Therefore, if you need kitchen cabinet design and installation anywhere in Kenya, contact us here for a free site visit, 3D visualization, and fully itemized BOQ today.
We are based at Solar House, Fourth Floor, Nairobi. Additionally, explore more kitchen design inspiration on suimas.co.ke.
Related Kitchen and Home Design Services
- Kitchen Interior Design Kenya
- Residential Interior Design Kenya
- Gypsum Ceiling Installation Kenya
- Floor Installation Services Kenya
- 3D Design & Layout Planning Kenya
- Painting & Special Effects Kenya
- Bedroom Interior Design Kenya
- Wallpapers & Wall Effects Kenya
- Aluminium & Glass Partitions Kenya
- House Renovation Contractors Kenya
Nairobi Areas We Serve
We design and install kitchen cabinets across Westlands, Karen, Kilimani, Kileleshwa, Lavington, Runda, Gigiri, Muthaiga, Parklands, Riverside, Upperhill, Hurlingham, Eastleigh, South C, South B, Langata, Embakasi, Donholm, Kasarani, Roysambu, Zimmerman, Kahawa West, Ruaka, Rosslyn, Kiambu Town, Kikuyu, Kinoo, Ruiru, Juja, Syokimau, Mlolongo, Kitengela, Athi River, Ngong, and the entire Nairobi CBD.
Kitchen Cabinet Services Across All 47 Counties
Moreover, Suimas designs and installs kitchen cabinets throughout all 47 counties in Kenya: Mombasa, Kwale, Kilifi, Tana River, Lamu, Taita-Taveta, Garissa, Wajir, Mandera, Marsabit, Isiolo, Meru, Tharaka-Nithi, Embu, Kitui, Machakos, Makueni, Nyandarua, Nyeri, Kirinyaga, Murang’a, Kiambu, Turkana, West Pokot, Samburu, Trans Nzoia, Uasin Gishu, Elgeyo-Marakwet, Nandi, Baringo, Laikipia, Nakuru, Narok, Kajiado, Kericho, Bomet, Kakamega, Vihiga, Bungoma, Busia, Siaya, Kisumu, Homa Bay, Migori, Kisii, Nyamira, Nairobi.
