Description

Aluminium Office Partition Cost Kenya  | Prices Per m², Designs & Installation

Aluminium office partition cost Kenya depends on the partition system, aluminium profile, infill material, glass specification, wall height, doors, hardware, finishes and installation conditions. For an office manager planning a renovation or a new workspace, the most useful quotation is therefore based on the actual measured area and selected specification.

Current SUIMAS pricing places aluminium office partitions from KSh 5,500–13,000 per m² for aluminium-based systems, while aluminium-and-glass combinations commonly fall around KSh 9,500–20,000 per m², depending on the configuration. (SUIMAS)

A current Jiji listing in Nairobi’s Industrial Area shows an aluminium office partition at KSh 6,500 and describes a satin clear-anodized aluminium frame with 1/4-inch MDF panels finished with off-white vinyl laminate. The listing also asks customers to contact the seller for pricing and consultation, so its displayed figure should be treated as a marketplace reference rather than a standardized per-m² installation rate.

At SUIMAS Interiors, we can take your project from measurement and space planning to material selection, fabrication, installation and finishing.

Need an aluminium office partition quotation? Send your office dimensions, floor plan or photos for a project-specific assessment.

---

Aluminium Office Partition Prices in Kenya

For 2026 budgeting, the following SUIMAS rates provide a useful guide:

SUIMAS currently publishes these specification-based rates and notes that final prices depend on factors such as glass type, frame finish, partition height and installation complexity.

For comparison, the current Interior Designers/SUIMAS aluminium office partition page gives a broader reference of KSh 4,000–7,000/m² for standard aluminium framed systems and KSh 6,000–12,000/m² for aluminium and toughened-glass systems, with final pricing confirmed after site assessment.

---

How Much Does Aluminium Office Partitioning Cost Per m²?

Most office partition projects use the face area of the wall.

Partition area formula

Length × Height = Partition area

For example, a partition measuring:

20 metres long × 2.7 metres high

requires:

20 × 2.7 = 54 m²

At KSh 9,500 per m²:

54 × 9,500 = KSh 513,000

At KSh 12,000 per m²:

54 × 12,000 = KSh 648,000

At KSh 15,000 per m²:

54 × 15,000 = KSh 810,000

These figures are useful for budgeting. However, doors, hardware, transport, frosting, special finishes and other site requirements can change the final cost.

---

What Is an Aluminium Office Partition?

An aluminium office partition uses extruded aluminium profiles as the main framing system. The frame can then hold glass, MDF, gypsum or other compatible infill materials.

This gives businesses several layout options without constructing conventional masonry walls.

ALI Glaziers currently has a dedicated aluminium category that includes aluminium partitions, aluminium doors and windows, as well as related hardware and fabrication products. Its catalogue also shows frameless-glass fittings, door handles, patch fittings and other components used around aluminium and glass installations.

An aluminium partition can therefore be used for:

• Private offices
• Boardrooms
• Meeting rooms
• Reception areas
• HR offices
• Finance departments
• Consultation rooms
• Staff rooms
• Open-plan departments
• Storage areas

---

Why Choose Aluminium Office Partitions?

Aluminium systems are popular because they combine structure, flexibility and a clean appearance.

Flexible office layouts

Businesses can divide large open spaces into smaller rooms without relying entirely on permanent walls.

Modern appearance

Powder-coated or anodized aluminium gives the office a defined, professional finish.

Glass integration

Aluminium profiles can easily accommodate clear, frosted or tinted glass.

Solid privacy

MDF or gypsum infill provides more visual privacy where required.

Easier future changes

Some modular systems can be dismantled and reconfigured rather than destroyed during a layout change. SUIMAS specifically describes its aluminium systems as demountable for this purpose.

Natural light

When you select glass infill, daylight can pass between rooms.

Easy maintenance

Aluminium frames are generally simple to clean and maintain.

---

Types of Aluminium Office Partitions

Not every office needs the same partition.

1. Aluminium + MDF Partition

This is a solid option where privacy matters.

It suits:

• Private offices
• HR rooms
• Finance offices
• Directors’ offices
• Stores

A current Jiji Nairobi listing provides an example of this approach, describing satin clear-anodized aluminium framing with MDF-core panels finished with off-white vinyl laminate.

---

2. Aluminium + Glass Partition

This is one of the most widely used configurations for modern workplaces.

The aluminium frame provides structure, while glass maintains visibility and natural light.

It works well for:

• Meeting rooms
• Boardrooms
• Reception
• Executive offices
• Open-plan workplaces

SUIMAS currently lists standard aluminium-and-glass systems from approximately KSh 9,500/m², with slimline and fully glazed options priced higher.

---

3. Aluminium + Frosted Glass

Frosted glass offers more privacy while retaining daylight.

Consider it for:

• HR
• Finance
• Management offices
• Consulting rooms
• Clinics

SUIMAS currently places its 100mm aluminium system with frosted or tinted glass around KSh 10,500–11,500/m².

---

4. Slimline Aluminium + Glass

Slimline profiles reduce the visual weight of the frame.

This creates a contemporary office appearance and works particularly well in:

• Technology offices
• Creative agencies
• Executive spaces
• Coworking offices
• Premium meeting rooms

SUIMAS currently lists slimline 50–75mm aluminium profiles with glass at around KSh 11,500–13,000/m².

---

5. Aluminium + Gypsum Hybrid

A hybrid partition combines solid and glazed areas.

For example:

Lower solid panel + upper glass

This gives privacy where desks or storage sit against the wall while keeping the upper portion open.

SUIMAS currently lists aluminium-and-gypsum hybrid systems around KSh 9,500–12,500/m².

---

Aluminium Office Partition Cost in Nairobi

Nairobi has a wide range of office spaces, from small leased suites to full corporate floors.

Current SUIMAS guidance places standard aluminium framed systems around KSh 4,000–7,000/m², while aluminium and toughened-glass systems fall around KSh 6,000–12,000/m² on its Nairobi-focused page. Its newer detailed 2026 pricing schedule provides higher specification-specific rates for complete aluminium systems.

The difference comes down to specification.

A basic aluminium-and-MDF divider is not comparable to a slimline, fully glazed system with premium glass and doors.

Nairobi areas served

SUIMAS provides office partitioning in:

Nairobi CBD, Westlands, Upper Hill, Kilimani, Kileleshwa, Lavington, Parklands, Karen, Runda, Gigiri, Muthaiga, Kitisuru, Riverside, Hurlingham, South C, South B, Lang’ata, Kasarani, Roysambu, Embakasi, Donholm, Umoja, Ruaka, Ruiru, Juja, Syokimau, Mlolongo, Kitengela, Athi River and surrounding areas.

For a wider office project, partitioning can also form part of a complete renovation and fit-out.

---

Aluminium Office Partition Cost in Mombasa

Aluminium systems work well for:

• Offices
• Hotels
• Shops
• Clinics
• Restaurants
• Apartments
• Commercial buildings

SUIMAS serves:

Mombasa CBD, Nyali, Bamburi, Shanzu, Mtwapa, Tudor, Kizingo, Likoni, Changamwe, Diani, Kilifi and surrounding areas.

The final quotation should account for transportation and site access because these conditions vary between locations.

---

Factors Affecting Aluminium Office Partition Cost Kenya

The final aluminium office partition cost Kenya depends on several project details.

Partition area

More square metres generally require more framing and infill material.

Aluminium profile

Standard profiles and slimline profiles have different material and fabrication requirements.

Glass type

Clear, frosted, tinted and laminated glass can produce different project costs.

Panel type

MDF, gypsum and other solid infill options have different specifications and finishes.

Wall height

A 2.4m office divider is different from a full-height wall extending to a high ceiling.

Doors

Sliding and hinged doors require separate hardware and installation components.

Hardware

Handles, locks, hinges, tracks and closers all affect the quotation.

Finishes

Powder coating, frosting, branding and decorative finishes can increase the project scope.

Acoustic requirements

Higher sound-control performance requires additional materials and more detailed construction.

Site access

High-rise offices and restricted delivery areas can increase handling and installation requirements.

SUIMAS currently identifies partition size, aluminium profile thickness, panel or glass type, doors, acoustic finishes, layout complexity and site access as key cost factors.

---

Aluminium Profile: What Should You Look For?

The aluminium profile is the skeleton of the partition.

Before accepting a quotation, ask:

What profile size is being used?

Is it anodized or powder-coated?

What colour is available?

Will the profile accommodate the selected glass or board?

Does the system include floor and ceiling tracks?

SUIMAS currently lists standard 100mm and slimline 50–75mm aluminium profiles for office partition applications.

ALI Glaziers’ catalogue also demonstrates that aluminium fabrication involves multiple profile and hardware components rather than one generic “aluminium” product.

---

Aluminium Office Partition Doors

Doors can substantially change the final quotation.

Common choices include:

Aluminium-framed glass door

A practical match for aluminium-and-glass partitions.

Frameless glass door

Suitable for premium office interiors.

Sliding aluminium glass door

Useful where swing space is limited.

Solid MDF/aluminium door

Useful where privacy is important.

Always ask whether the quoted price includes:

• Door leaf
• Frame
• Handle
• Lock
• Hinges
• Door closer
• Sliding track
• Installation

The Jiji marketplace also illustrates this point, with separate office partition and door-related listings appearing at different prices and units.

---

Aluminium Office Partition vs Gypsum

Both systems can work well.

An office can also combine both.

For example, use aluminium and glass around the reception and meeting rooms, then use gypsum for highly private back-office spaces.

---

Aluminium Office Partition vs Frameless Glass

A hybrid project can use aluminium framing throughout most of the office and reserve frameless glass for the boardroom or executive suite.

---

Aluminium Office Partition Cost Example

Consider an office requiring:

50m² aluminium + glass partition

Using an illustrative rate of KSh 10,000/m²:

50 × 10,000 = KSh 500,000

Then add:

2 glass doors

Door hardware

Frosting, if required

Transport, where applicable

Installation or other associated works

This shows why a per-m² figure is only the starting point.

---

Sample Aluminium Office Partition Quotation

A quotation can be structured like this:

Illustrative base subtotal: KSh 583,000 + assessed additional costs.

This is an example format only. The actual quotation should use your project’s measured quantities and agreed specifications.

---

What Should Be Included in an Aluminium Office Partition Quotation?

A professional quotation should clearly identify:

Material

Aluminium, glass, MDF, gypsum or hybrid system.

Measurements

Length, height and total partition area.

Glass

Type and thickness.

Aluminium

Profile type, size and finish.

Doors

Type and quantity.

Hardware

Handles, locks, hinges, closers and tracks.

Finishing

Frosting, powder coating, trims, seals and branding.

Installation

Labour and fitting.

Transport

Delivery and mobilization requirements.

Additional works

Demolition, electrical relocation, ceiling repairs or other associated works.

This level of detail helps you compare quotations fairly.

---

Aluminium Office Partition Installation Process

A reliable installation begins with proper planning.

1. Consultation

We discuss your requirements, budget, privacy needs and preferred appearance.

2. Site measurement

The team measures wall length, height, door openings and relevant site conditions.

3. Office space planning

The partition layout is coordinated with furniture, lighting and circulation.

4. Material selection

You choose the aluminium profile, glass, MDF, gypsum and hardware.

5. Quotation

The project receives a clear, specification-based quotation.

6. Fabrication

The aluminium and infill components are prepared.

7. Installation

Frames, panels, glass, doors and hardware are fitted.

8. Finishing

Seals, trims, handles, locks and other details are completed.

9. Inspection

The finished work is checked before handover.

SUIMAS currently states that its aluminium office partition service includes design, fabrication and installation, with customization around office layout and material selection.

---

What We Offer at SUIMAS Interiors

At SUIMAS Interiors, aluminium office partitioning forms part of a wider commercial interior solution.

Aluminium Office Partitions in Kenya

Professional aluminium systems for offices, institutions, hospitals, banks and commercial buildings. The service covers design, fabrication, installation and customized layouts.

Aluminium & Glass Partitions

Combine aluminium frames with clear, frosted, tinted or laminated glass. Hybrid glass, MDF and gypsum configurations are also available.

Modern Office Partitions

Explore framed glass, slimline aluminium, aluminium-and-gypsum hybrids, sliding partitions and fully glazed systems.

Office Partitioning Prices in Kenya

Compare gypsum, MDF, aluminium, glass, frameless, acoustic and demountable partition systems.

Cost of Office Partitions in Kenya

Review detailed system pricing, worked examples and factors affecting the final quotation.

Office Partitioning Quotation

Request a quotation based on your actual office dimensions and preferred partition system.

Office Partitioning Cost in Nairobi

See Nairobi-specific budgeting guidance for office partitioning and fit-out projects.

---

Other Services We Offer

Aluminium office partitioning can be coordinated with other SUIMAS services to create one complete interior project.

Office Interior Design

Space planning, workplace layouts and complete office interior design.

Office Renovation

Upgrade existing offices with coordinated renovation and finishing works.

Gypsum Ceiling Installation

Modern gypsum ceilings for offices, homes and commercial spaces.

Gypsum Wall Partitions

Solid internal partitions for private offices and service areas.

Acoustic Soundproof Gypsum

Higher-performance gypsum solutions where sound control matters.

Wooden Flooring

Wood flooring for residential and commercial interiors.

Vinyl Flooring

Durable flooring for offices and other busy spaces.

Tiling & Terrazzo

Interior floor and wall finishes.

Epoxy Flooring

Hard-wearing flooring solutions for suitable commercial environments.

Granite & Marble Installation

Stone finishes for countertops and premium interior surfaces.

Kitchen Renovation

Custom kitchen layouts, cabinetry and finishes.

Bathroom Renovation

Complete bathroom interior upgrades.

Aluminium Doors & Windows

Aluminium fabrication and installation for doors and windows.

The SUIMAS website currently groups these solutions within its commercial, residential, flooring, gypsum, branding, painting and interior-design services.

---

Why Choose SUIMAS for Aluminium Office Partitions?

A partition should not only divide the office. It should improve the way the entire space functions.

That means considering:

Privacy — which rooms need clear, frosted or solid surfaces?

Natural light — where can glazing improve light distribution?

Furniture — where will desks and storage sit?

Doors — where should people enter and exit?

Electrical points — which walls need sockets and data connections?

Lighting — how will ceiling lights work with the new rooms?

Branding — should the glass carry privacy bands or your company logo?

Future changes — could the business need to reconfigure the space later?

SUIMAS currently promotes complete partition planning, material selection, customization and installation rather than treating the aluminium frame as a standalone product.

---

How to Get an Accurate Aluminium Office Partition Quote

You do not need to know the exact partition specification before contacting us.

Send:

Project location

Approximate wall length

Ceiling height

Number of rooms

Number of doors

Current office photos

Floor plan, if available

Preferred finish

Clear, frosted, tinted, MDF, gypsum or hybrid

A preliminary assessment can then determine the suitable system.

For larger projects, a site measurement should follow before fabrication.

---

Areas We Serve Across Kenya

SUIMAS provides office partitioning and interior solutions across all 47 counties:

Nairobi, Mombasa, Kwale, Kilifi, Tana River, Lamu, Taita-Taveta, Garissa, Wajir, Mandera, Marsabit, Isiolo, Meru, Tharaka-Nithi, Embu, Kitui, Machakos, Makueni, Nyandarua, Nyeri, Kirinyaga, Murang’a, Kiambu, Turkana, West Pokot, Samburu, Trans Nzoia, Uasin Gishu, Elgeyo-Marakwet, Nandi, Baringo, Laikipia, Nakuru, Narok, Kajiado, Kericho, Bomet, Kakamega, Vihiga, Bungoma, Busia, Siaya, Kisumu, Homa Bay, Migori, Kisii and Nyamira.

For Nairobi projects, we serve CBD, Westlands, Upper Hill, Kilimani, Kileleshwa, Lavington, Parklands, Karen, Runda, Gigiri and other commercial areas.

---

Frequently Asked Questions

How much does aluminium office partition cost in Kenya?

Current SUIMAS pricing places aluminium office partitions around KSh 5,500–13,000/m² for aluminium systems, while higher-specification aluminium-and-glass configurations can range from about KSh 9,500–20,000/m².

How much does aluminium office partition cost in Nairobi?

A current SUIMAS Nairobi guide gives a broad reference of KSh 4,000–7,000/m² for standard aluminium framed systems and KSh 6,000–12,000/m² for aluminium and toughened-glass systems. Higher-specification systems cost more.

What is the cheapest aluminium office partition?

Aluminium with solid MDF or gypsum infill generally has a lower starting price than slimline, fully glazed or specialist acoustic systems.

Is aluminium partitioning suitable for offices?

Yes. It can create private rooms, meeting spaces, reception areas and departments while allowing different combinations of glass and solid panels.

Can aluminium partitions be removed later?

Some modular and demountable systems can be dismantled and reconfigured. SUIMAS specifically describes its aluminium systems as demountable.

Can aluminium partitions include glass?

Yes. Clear, frosted, tinted and laminated glass can be incorporated into aluminium systems.

Does the per-m² price include doors?

Not necessarily. Always confirm whether doors and hardware appear separately in the quotation.

Can I get a quotation from photos?

Photos can support an initial estimate. However, final pricing should follow actual measurements and specification.

How long does installation take?

SUIMAS currently states that many partition installations take around 2–5 days, depending on area and partition style. Larger or more complex offices can take longer.

---

Get an Aluminium Office Partition Quotation in Kenya

Your office partition should fit the space, purpose, appearance and budget.

Whether you need:

Aluminium + MDF

Aluminium + clear glass

Frosted glass

Slimline aluminium + glass

Aluminium + gypsum

Sliding aluminium partitions

or a complete office fit-out, SUIMAS can help you plan the system around your actual space.

Request Your Aluminium Office Partition Quote Today

Send your:

Project location + wall dimensions + office photos + floor plan + preferred design.

For broader commercial interior services, visit InteriorDesigners.co.ke for aluminium office partitions, office interiors and related fit-out services.

SUIMAS Interiors — Aluminium Office Partitions, Glass Partitions, Office Renovation, Interior Design and Complete Fit-Out Solutions Across Kenya.